EARTHING SYSTEMS

In today’s world, electricity has become an integral part of our lives. From household appliances to large industries, all rely on electricity. However, with increasing electrical installations, there comes an inherent risk of electrical hazards.

Electrical earthing is a critical safety measure that helps protect both people and equipment. Earthing provides a safe path for electrical currents to flow to the earth in case of any faults, preventing damage or electrocution.

Chemical Earthing is a type of earthing that utilizes chemicals and electrodes to create a conductive path between the earth and the electrical installation. This method of earthing is gaining popularity due to its effectiveness in providing low impedance paths for electrical faults.

Types of Chemical Earthing

Pipe Type Chemical Earthing

In Pipe type chemical earthing, a copper-coated pipe is buried vertically in a pit filled with a mixture of charcoal, salt, and bentonite. This type of earthing is suitable for areas with high soil resistivity.
In this technology, there are two pipes of different diameters. The smaller dia pipe (main conductor) is placed centrically inside the bigger dia pipe (outer pipe) and space inside the electrode is tightly filled with a crystalline conductive mixture (CCM) and then sealed. The crystalline mixture contains natural elements and compounds, which are high conductive as well as anti corrosive.

Rod Type Chemical Earthing

In Rod type chemical earthing, a copper bonded rod is buried vertically in a pit filled with a mixture of charcoal, salt, and bentonite. This type of earthing is suitable for areas with medium soil resistivity.

In this technology, one solid rod of required length and dia is used as electrode. The area around the electrode should be filled with Ennov Ground Enhancement Material.elements and compounds, which are high conductive as well as anti corrosive.

Stripe In Pipe Chemical Earthing

In this technology, one strip and one pipe are used. The strip (main conductor) is placed centrically inside the outer pipe and space inside the electrode is tightly filled with a crystalline conductive mixture (CCM) and then sealed. The crystalline mixture contains natural elements and compounds, which are high conductive as well as anti corrosive.

Back Fill Compound

Back Fill Compound is specially developed compound capable of absorbing and retaining the moisture for a longer period. It has all the qualities of an ideal Back Fill Compound for an effective & efficient Earthing System. It consistently holds its own shape and adheres to any surface it touches.

FRP Earth Pit Chamber

Light weight
High mechanical strength
UV stabilized
Detachable easy locking lid
Cost effective solution
Load bearing capacity of 2.0 tons

Advanced ESE Lightning Protection

The principle of operation for ESE terminals is to create an upward propagating streamer earlier than conventional air terminals or other objects on the earth by collecting and storing ground charge during the initial phase of a thunderstorm development and emits strong and consistent upwards streamers to intercept leaders.

Invo Tech Engineers & Consultants

Invo Tech Engineers & Consultants